Collections

Specifically designed to attach wood to light section steel (Max. 4mm). Coarse self-tapping thread with wings designed to ream out the timber, so the screw can achieve Max. R.P.M. without burning out. When the wings hit the metal they will break off to permit the thread to self-tap into the metal.

Wing-Tip Screw - Light Section Steel - Bi-Metal

Specifically designed to attach wood to light section steel (Max. 3mm). Coarse self-tapping thread with wings designed to ream out the timber, so the screw can achieve Max. R.P.M. without burning out. When the wings hit the metal they will break off to permit the thread to self-tap into the metal.

Wing-Tip Screw - Light Section Steel - Exterior

Specifically designed to attach wood to metal (Max. 4mm). Coarse self-tapping thread with wings designed to ream out the timber, so the screw can achieve Max. R.P.M. without burning out. When the wings hit the metal they will break off to permit the thread to self-tap into the metal.

Wing-Tip Screw - Light Section Steel -Zinc

Wingspade Clips

Wingspade Pocket Pack

Wiping Rags

Wiping Rags

Wire Hand Brushes

Wire Hand Brushes

A low security lightweight hasp and staple for sheds and toolboxes in light domestic applications. Fixings not included.

Wire Pattern Hasp & Staple

Premium cable and wire cutters, manufactured with hardened cutting jaws capable of copper and aluminium cables. Featuring soft-grip handles to reduce slipping and provide the perfect grip for effortlessly cutting through tough cables.

Wire Strippers

Wood

Wood

A high quality, resin based wood adhesive for all wood bonding. It can be used internally and provides a high strength, impact resistant bond. Ideal for all general woodworking and joinery uses, furniture assembly and household DIY use. Can also be used in short term wet, damp and humid environments such as kitchens, bathrooms, washrooms and covered external applications. Fast cure, initial set in just 10 minutes. Suitable for load bearing work

Wood Adhesives

A selection of quick release Flat Wood drills. The quick release feature is designed to ensure a rapid change of bits making it ideal for multiple applications. Sold in a robust weatherproof case.

Wood Bit Sets

A tough and hard wearing wood chisel, engineered from hardened and tempered steel. Featuring a super soft grip, split resistant handle and a fully forged strike cap for use with hammers.

Wood Chisels

A fast acting, water based decking cleaner, formulated for use on all timber, composite and plastic decking. The super concentrated formula removes dirt, grime, fungi and algae making it ideal for light cleaning and thorough restoration.

Wood Cleaners & Revivers

Bi-Metal Jigsaw blades providing a straight clean cut, suitable for all wood and plastic. The bi-metal blade is the combination of both a high carbon steel (HCS) body and a high speed steel (HSS) cutting edge. Giving strength and flexibility at both low and high temperatures. A tough, shatter resistant blade that keeps its edge longer. Extended service life leads to greater cost effectiveness per blade. Ground & taper ground (GTG) teeth give a c

Wood Cutting - Bi-Metal Jigsaw Blades

Bi-Metal Reciprocating Saw Blades are suitable for thin sheet metal, wood with nails and all wood. The bi-metal blade is the combination of both a high carbon steel (HCS) body and a high speed steel (HSS) cutting edge. Giving strength and flexibility at both low and high temperatures. A tough shatter resistant blade that keeps its edge longer. Extended service life leads to greater cost effectiveness per blade. Milled & side set (MSS) teeth give

Wood Cutting - Bi-Metal Reciprocating Saw Blades

A natural linseed oil blended with driers to improve drying times. Boiled Linseed penetrates unsealed wood leaving a natural, water resistant finish with a slightly enhanced colour that darkens slightly with age.

Wood Oils

Formulated to be used on pressure-treated timber where it has been cut, drilled or worked in any way to expose the untreated inner wood. Protects against decay such as wet rot, discolouring fungus insect attack.

Wood Preservers & Treatments

A premium 7tpi hand saw, manufactured from high grade carbon steel. Featuring 3D triple ground and hardened teeth for rapid performance and a polished and lacquered blade for smooth cutting and corrosion resistance. The super soft-grip handle gives a firm hold and enhances comfort. Ideal for rip cutting wood.

Wood Saws

A high quality satin finish. Gives excellent durability to kitchen furniture, internal doors and other joinery products

Wood Varnishes

Briwax Original is formulated with fast drying, stronger solvents which speed up drying and also increase the cleaning ability of the wax slightly. This means that it will renovate older dirtier furniture and leave you with the deep grain enriching Briwax shine. Unsealed wooden surfaces should be smooth, dry and clean.

Wood Waxes

A natural linseed oil blended with driers to improve drying times. Boiled Linseed penetrates unsealed wood leaving a natural, water resistant finish with a slightly enhanced colour that darkens slightly with age.

Woodcare

Woodscrews

Woodscrews

Lightweight wraparound glasses designed to give enhanced peripheral vision whilst also increasing side protection. The arms are adjustable to accommodate all head sizes and the lenses are treated with an advanced coating to prevent scratches.

Wraparound Safety Glasses

An assortment of popular wrecking and pry bars containing traditional wrecking bars, utility bars and an aligning bar. Manufactured from drop forged high quality carbon steel with hardened and tempered impact faces. Ideal for almost all wrecking, prying and demolition jobs.

Wrecking & Pry Bar Set

A traditional style, hexagonal shaft wrecking bar manufactured from hardened and tempered carbon steel for exceptional performance and working life. Ideal for wrecking, prying and demolition jobs. Featuring machined tips to prevent slipping, integrated nail puller and extra tough powder coating.

Wrecking Bar

A professional adjustable wrench manufactured from heavy duty chrome vanadium, hardened and tempered for exceptional tool life and performance. Featuring an ergonomic soft-grip handle for superior user comfort, control and slip resistance with head markings for easy adjustment to the required size.

Wrenches

This impact resistant quick change adaptor is for converting a 1/4” hex drive into a male 1/2” socket adaptor.

X6 Impact Adaptors

Convenient pocket sized mixed set of 10 commonly used 25mm impact resistant bits with 1x 60mm impact magnetic bit holder.

X6 Impact Driver Bits & Sets

These professional grade impact nut drivers are designed to withstand the toughest fastening applications. The powerful magnet allows for a secure grip and unyielding bit engagement. Ideal for use on hex head screws when installed with an impact driver.

X6 Impact Socket Drivers